Datavideo SE-1000 HD / SD-SDI Vision Mixer - HD-SDI, SDI and DVI-D
|
The Datavideo SE-1000 is a vision mixer with six inputs (five HD or SD SDI and one DVI-I) and three outputs (three HD or SD SDI), RS-422 control. The SE-1000 also offers Ethernet connectivity and a built-in, 10-bit, 6-channel frame synchroniser that adjusts automatically. To assist the producer during any live event, the SE-1000 has six built in HD-SDI to HD-YUV, SD-YUV and Composite format converters enabling loop through of each input for real time monitoring during production.
The Datavideo SE-1000 is ideal for applications within education, worship, live music videos, cable shows, corporate videos and event staging.
Features also include nine wipe patterns and three directional wipes. Datavideo SE-1000 will operate in all recognised SD and HD formats enabling integration with existing equipment, while at the same time being future proof.
Simple operation and rugged construction allow the SE-1000 to be used in studios, in a Mobile Video Studio, on board an OB truck, in a post production facility, in education applications or for any application where a reliable, high quality/low cost video switcher is required. |
|
Features
- Worldwide SD and HD formats supported in one unit (not mixed formats) - SD: 576/50i, 480/59.94i HD: 1080/50i, 1080/59.94i, 720/50p, 720/59.94p
- Six inputs (5 x HD-SDI or SD-SDI, 1 x DVI-I)
- Three SDI output and three HD Analogue Component Output
- Six built in DAC-40 SD/HD-SDI Downconverters. Loop the video input to the internal DAC-40s to enable monitoring out on cheap HD/SD Component or Composite. Perfect for the Datavideo TLM-433 3 x 4.3" 16:9 LCD Monitors (under $2000).
- Built in 1-frame 10bit Frame Synchroniser which enables switching without glitch or freeze even with asynchronous video signals - no genlock required. The synchroniser can be turned off if you are using devices with external locking. The delay is reduced to 1 Horizontal line when the synchroniser is turned off.
-
Enable genlock to reduce the frame sync delay down to one line. Perfect for live events where minimal delay is required.
- Keying - Both linear and self keying is possible as well as key invert.
- Six tally outputs, RS-422 and GPI interfaces enable configuration in a wide range of switching options.
- To complete the IT infrastructure the SE-1000 has a built in network interface enabling easy use of a PC to add images and graphics.
- Range of Switching Effects - The unit includes a wide range of simple to operate wipe patterns including nine wipe patterns and three directional wipes.
- 12 volt operation - 12V operation makes this unit ideal for outside broadcast applications, and a perfect companion for Datavideo's Mobile Video Studio Solutions.
|
|
Package Contents
- SE-1000 switcher
- Aluminium Foam Padded Carrying Case
- BNC to BNC 14.5cm cable x 6
- YUV Cable - 4 x BNC to BNC Cable 3m x 1
- DVI to DVI 1.8m cable x 1
- RJ45 CAT 5 crossover Ethernet cable 1.8m x 1
- AC/DC switching adaptor 12V 10A
- Australian IEC Power cord
- Instruction manual
|
|
Specifications
| Video Processing |
| Video Format |
SD: 576/50i or 480/59.94i
HD: 1080/50i, 1080/59.94i, 720/50p or 720/59.94p (not mixed)
Y:Cb:Cr 4:2:2 10bit, RGB 4:4:4 10bit
|
| SDI/HD-SDI Specifications |
| Standard |
SD-SDI: SMPTE 259M-C (270Mbps - 625/525 Digital Component Video)
HD-SDI: SMPTE 292M (1.485/1.001 Gbps)
|
| Connector |
BNC (IEC 169-8) |
| Impedance |
75 Ω |
| Timing Jitter |
SMPTE-292 standard:
< 1.0UI (in HD-SDI)
< 0.2 UI (in SD-SDI)
|
| Alignment Jitter |
SMPTE-292 standard:
<0.2 UI (in HD/SD-SDI) |
| Return Loss |
HD: > 15 dB (5 MHz to 750 MHz), 10 dB (750 MHz to 1.5 GHz)
SD: > 15 dB (5 MHz to 270 MHz)
|
| Equalisation |
265 m Belden 8281 cable at 270 Mbps;
135 m (typical) of Belden 1694A at 1.485 Gbps |
| Source Inputs |
| HD/SD-SDI |
5 inputs (with active loop through) |
| DVI-I |
DVI-I contains: DVI-D (digital) and VGA (analogue) on a DVI-I connector
Supported Resolutions: XGA 1024x768 and SXGA 1280x1024 (60Hz)
|
| Key |
1 input from any video input |
| Reference |
1 x BNC Input. See Reference Options for details.
|
| Bus Switching Mode Selection |
Flip/Flop or A/B Mode |
| Main Outputs |
| SD/HD-SDI |
2 x Program (PGM)
1 x Preview (PVW)
2 x Auxiliary (AUX) |
| Analogue Component (YPbPr, SD, HD) |
1 x Program (PGM)
1 x Preview (PVW)
1 x Auxiliary (AUX) |
| Auxiliary Output |
Assigned from bus cross points (XPT) 1-7, Program, Preview and Clean |
| Reference |
2 x BNC for output or loop through. See Reference Options for details.
|
| Video Delay |
| Frame Synchroniser Off |
1 horizontal line delay when 10bit Frame Synchroniser is turned off. The synchroniser can be turned off if you are using devices with external locking. |
| Frame Synchroniser On |
1 frame delay when 10bit Frame Synchroniser is enabled. The synchroniser ensures glitch / freeze free switching even with asynchronous video signals - no genlock required. |
| Effects |
| Transition |
Cut, Mix, Wipe (9 Patterns / 3 Directions) |
| Key |
Self Key, Linear Key |
| Freeze Frame |
1-7 Crosspoints |
| Interface |
| Ethernet |
1 x 100 Mbps / 10 Mbps |
| Serial (Editor) |
1 x D-Sub 9 Pin (RS422A) |
| Tally Output |
1 x D-Sub 9 Pin, Channel Open Collector Output |
| GPI |
1 x 3.5mm Jack Socket (Auto Take) |
| HD/SD Cross Converter (DAC-40) |
| Inputs |
6 x HD/SD-SDI (BNC) |
| Outputs |
6 x HD-Component, SD-Component or Composite Video (selectable for each input) |
| Input Formats |
SD: 576/50i, 480/59.94i
HD: 1080/50i, 1080/59.94i, 720/50p, 720/59.94p (auto detect)
|
| Output Formats |
SD (Composite or Component): 576/50i, 480/59.94i
HD (Component): 1080/50i, 1080/59.94i, 720/50p, 720/59.94p
|
| Aspect Ratio Converter |
Not Currently Available |
| Video Correction |
Brightness, Colour, and Tint (Tint is NTSC Only) |
| IRE |
0 - 7.5 IRE Options (NTSC Only) |
| Colour Bar Output |
SD: SMPTE Colour Bars Only
HD: Crosshatch Only |
| Other |
| Network Configuration |
IP Address, Subnet Mask, Gateway (via LCD control interface) |
| Flash Memory Still Image Formats |
Upload: BMP, GIF, TIFF, JPEG, PNG
Download: BMP |
| Flash Memory Still Image Resolutions |
SD: 720x576, 720x480
HD: 1280x720, 1920x1080 |
| Flash Memory Still Image Number |
One Only |
| Flash Memory Still Image Loading |
Via Ethernet and Software, or via Axillary Output Capture |
| Preset Memory (Overall Machine Profiles) |
10 Available |
| Reference Options (Sync, Genlock) |
Internal Mode: No external reference input (sync internally generated), Both BNCs output Black Burst to sync external devices.
Black Burst Standard Input (BBST): Black burst standard input on BNC, loop through BNC output (SD Only).
Black Burst Advanced Input (BBAD): Black burst advanced input on BNC, loop through BNC output (HD Only).
Tri-Level Sync Signal (TRI): Input on BNC, loop through BNC output (HD Only).
|
| General |
| Operating Temperature |
0°C to +40°C |
| Humidity |
10% to 90% (non condensing) |
| Power |
DC 12V 10A (4-pin XLR). AC adaptor supplied. |
| Dimensions |
426 x 119 x 368mm (WxHxD) |
| Weight |
Approx 5.7 kg |
|
|
Front Functions
Click here for a larger image.
For full details on all of the connections and their functions, please see the manual.
|
|
Rear Connections
Click here for a larger image.
For full details on all of the connections and their functions, please see the manual.
|
|
SE-1000 Package
|
|
SDI to HD-SDI Converters and Reclockers
If you need to up convert SDI to HD-SDI, we recommend the Cobalt Digital 8003 and the Cobalt Digital 8002 converters:
|
|
Cobalt Digital
8003 HD/SD Reclocking Distribution Amplifier with Bit-Rate Status
Cobalt Digital 8003 HD/SD Reclocking Distribution Amplifier with
Bit-Rate Status (Supports SMPTE 424M - 3 Gbit) is a compact HD/SD
multi-rate distribution amplifier that features HD/SD status LEDs for
quick identification of the input bit rate. The 8003 is fully automatic
and supports 424 (3 Gbit), 292 and 259M signals. The unit has one input
and six reclocked SDI outputs... more |
|
|
Cobalt Digital
8002 HD/SD Reclocking Distribution Amplifier with Bit-Rate Status
Cobalt Digital 8002 HD/SD Reclocking Distribution Amplifier with
Bit-Rate Status is a compact HD/SD multi-rate distribution amplifier
that features HD/SD status LEDs for quick identification of the input
bit rate. The 8002 is fully automatic and supports SMPTE 292 and 259M
signals. The unit has one input and six reclocked HD/SD-SDI outputs... more |
Click here
for the full Cobalt Digital product range.
|
|
SE-1000-DVI-resolutions
Click Here for a larger image.
|
|
Studio Setup
Click on the image for a larger view
|
|
Mobile System Setup
Click on the image for a larger view
|
|
Accessories
|
|
|